starting price
Ceramic coating and paint correction
Polish out the swirls, then lock in the gloss. Every coating is done inside our Morgan, Utah shop.
What a ceramic coating does for your paint
A ceramic coating is a hard, clear layer that bonds to your clear coat. It locks in the gloss after paint correction and gives dirt and water very little to grip. It lasts years, where wax lasts weeks. We apply ZR53 ceramic coating.
Deep, lasting gloss
The shine you pick up in the shop stays put, wash after wash.
Easier to keep clean
Water beads and rolls off. Dirt rinses away instead of sticking.
Protection from the elements
A barrier against UV fading, winter road salt, bug splatter and bird droppings.
Paint corrected first
We polish out swirls and light scratches before coating, so the coating seals in a clean finish, not the flaws.
How we coat your car
Every coating follows the same four steps, all inside our shop.
Wash and decontaminate
A full hand wash, then iron removal and a clay treatment to pull out the bonded grime a normal wash leaves behind.
Paint correction
Machine polishing removes swirls, haze and light scratches so the paint is as clear as it can be.
Coating applied
ZR53 ceramic coating goes on panel by panel under controlled light, temperature and humidity.
Cure and hand-off
It cures indoors before you pick up. We walk you through how to wash and care for it.
Get a coating quote
Every car is different, so we quote coatings after looking at your paint. Book a time or call and we'll talk through the right coating for how you drive.
Coating and correction prices
Starting prices by vehicle size. We confirm your quote after looking at your paint.
starting price
These are starting prices. We confirm your quote after looking at your paint.
Your budget
$400to$2,000
Now open in Morgan, Utah
Coatings come out best indoors. Our shop gives every car the controlled space a lasting coating needs.
- No dust or pollen
- Nothing lands in the coating while it bonds.
- Steady temperature and humidity
- The coating cures evenly, the way it was made to.
- Proper lighting
- We see every swirl during paint correction, so none get sealed in.